To help you get the best results when taking the D.I.Y. route with Teca Tek we have written some instructions to help the process go a lot smoother for you. Click on the sub-heading below to view further information:

This is the first step to creating a panel and is by far the most important. If the template is incorrect the finished panel will not fit. Have a look through this guide to help you get the best result.

Here is a great guide to have at hand when cutting and shaping a pre-made mat. This guide walks you through the steps of drawing your template onto the mat and how to get the best finish. This guide shows you how to lay and glue the decking like an expert. Please make sure you have had a look through this if you plan to fit your panel’s yourself as it can be quite an in depth procedure.

Specification

Material
A composite of virgin flexible PVC containing outdoor grade pigments and UV stabilizers.

Thickness. 4.70mm
Weight. 6.30 kilos per m2
Specific Gravity. 1.40
Shore A hardness. 83
Fire Resistance. Flash ignition temperature 330º C. Self ignition 400º C.
Tolerance. +/- 2%

Adhesives
A system of adhesives especially formulated for the different surfaces and conditions of work. Adhesives with high strength, resistant to water, chemicals, alkaline and the marine environment.

Based on Silyl Modified Polymer (S.M.P.)
Bureau Veritas Certificate Nº 14325/AO EC
Permanently elastic within temperature range from -40º C to + 100ºC.